图片说明：

特点

·本机是一款采用国外先进上光技术，并结合国内行业特点而设计的纸张表面UV过油上光设备。经过本机处理后，纸张拥有良好的光泽度，且具有防污、防潮、防退色和耐磨等特点。涂布机选用P LC控制的风刀系统，以确保80g/m2以上的纸张顺利上光，整机由手动送纸台、涂布、红外线干燥、紫外干燥及简易收纸台5部分组成，经济实用的组合是中小企业上光加工的理想选择。

 

Features

·The machine is a kind of UV oil coating machine for paper which adopts international advanced coating technology and also combines the features of domestic printing industry. After coated by the machine, the products will have perfected gloss, and also be anti-fouling, damp-proof, fade-proof and wear-resistant. The coating unit of the machine adopts PLC air-knife system, which guarantees the coating smooth to the paper over 80g/m.The machine is composed of 5 units: manual paper feeder, coating unit, IR drying unit, UV drying unit and easy receiving table. The machine is an ideal choice for medium and small enterprises for its economic and utilitarian assembly m'of working stations.

 

配置说明

一：涂布系统

·三辊逆转式上光

A.上油的厚薄可通过调节计量辊速度来控制，节约油量

B.单独的变频器控制计量辊逆转，比简单的对滚式多省油

C.橡胶辊165MM，压力辊138MM  计理辊118 辊越大，橡胶越厚，做出来的效果越好

·配风刀，厚薄纸均可以 80G以上纸张 ，风力的大小，吹风的时间由PLC控制

·卷纸自动停机功能，保证浪费率

·自动计数功能

·各辊为同步调节

·双刮刀

·设有UV和IR两油箱，并设有温度加热控制

二：烘箱系统

·烘道为6米（加长型），烘道越长，流平性越好，烘干和固化度加强。

·设有UV与IR两个系统，并且分别控制，不能同时使用

·15根IR灯管和3根UV灯管，UV灯管依选择分别控制，除UV油上光外，可用于油性原料（溶剂）水溶性原料（乳化性）酒精性原料  （醇料）及吸塑油等纸张上光

·急停或过热保护装置，当急停或里面温度超过150度会自动升起保护罩散热，防止火灾

·设有抽风系统，UV固化箱位置下面有排风机和风箱组成强吸风装置，能抽出臭氧和散热功能及使纸张不易卷曲炉中而能平整顺畅通过 

·采用国内较好的空压机及储气灌

·设有自动纠偏系统，纸张输送采用进口铁氟龙为基材的输送带，可防紫外线，坚固耐用，不托花纸张，电眼探测铁氟龙输送带，自动归位纠偏装置

·全程采用吸风输送，保证厚薄纸运行正常，整齐顺利通过

·各机段由单独的变频器控制

·效果好，无桔皮现象，

Configuration

·Manual paper feeder

-- Paper sheets are put on the table by hand one by one.

-- Paper regulating plate regulates manual paper feeding.

·UV drying unit 

--UV radiation makes UV oil hard and wear-resistant, and paper surface will be much glossier.

-- Fast cooling system equipped to prevent paper curvature

-- Mesh Teflon belt conveyor is equipped with air aspirator to guarantee paper conveyed steadily.

·I.R drying unit

-- I.R drying devices equipped

-- Hot air circulation system equipped

-- To do drying after water-base coating or solvent coating 

-- Mesh Teflon belt conveyor is equipped with air aspirator to guarantee paper conveyed steadily.

·UV Coating unit

-- UV coating unit is equipped with high sensitivity of PLC air-knife system which guarantees smooth

     coating to thick and thin paper.

-- Micro adjustor equipped to control oil usage and coating quality is convenient for users to adjust upon application needs.

-- Paper winding protector: when paper sticks and wraps the coating roller, the protector will stop the

     machine's running and the buzzer rings at the same time